Bose Solo Manual do Utilizador descarregar pdf (Página 27)

Disassembly Procedures

4A. Metal Grille Removal

4A.1 Perform procedure 3 first. The top cover must

be removed because pins in the top cover fit into the

grommets on the metal grille securing the top of the

grille in place.

4A.2 On the bottom of the unit, remove the four

screws securing the grille as indicated in Figure 6.

4A.3 Turn the unit over. Grasp the grille by the sides

as indicated by the arrows in Figure 7A and pull

forward to release the grille edge from the enclosure.

Work the grille out of the cabinet using care not to

bend the grille.

Note: When installing the metal grille, make sure the

5 rubber grommets are inserted in the grille holes

indicated in figure 7A. When installing the cover,

ensure the 5 pins on the cover insert into the grom-

mets to ensure proper grille alignment.

4B. Cloth Grill Removal

4B.1 Perform procedure 3 first. The top cover has to

be removed to properly grasp the grill to remove it.

4B.2 Grasp a side edge of the grille and pull it

straight forward to release the grille clip from the

enclosure’s clip catch. Do this for both the other

side. See figure 7B and 8.

4B.3 After releasing the left and right side of the

grille, pull the grille forward working toward the center

releasing its posts from the grommets in the inclo-

sure. See figure 9.

Figure 7A. Metal Grille Removal

Figure 6. Metal Grille Screw Removal

Grommets

Figure 7B. Cloth Grille Removal

Figure 8. Cloth Grille Side Clip

Grille Side Clip

Grille Side Clip Catch

Figure 9. Cloth Grille Enclosure Grommets

Location

Two rectangle grommets located front center

8 round grommets, 4 located on each side

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34

Sem comentários

Bose Solo Manual do Utilizador Página 27