Bose ESP-00 Series II Manual do Utilizador descarregar pdf (Página 6)

ControlSpace

ESP-00 Series II

engineered sound processor

TECHNICAL DATA SHEET

All information subject to change without notice.

® 2013 Bose Corporation

All trademarks are those of their respective owners.

Bose Professional Systems Division

OF 7

pro.Bose.com

Software Information

Bose® ControlSpace® Designer™ software is used for the

design, configuration, real-time operation and monitoring of

a system containing selected Bose system electronics and

control centers. Using a standard drag-and-drop user interface,

ControlSpace Designer software offers the flexibility to quickly

and accurately configure signal processing functions within

processors, and to develop complex control programming for

system operation.

When actively connected to the system ControlSpace Designer

software can be used to either control and operate the system

in real time for system set-up and optimization, or may be used

as a system monitor. When configured for monitor mode device

parameters are protected and the system operator only has

access to virtual control panels and amplifier monitor functions.

Parameter sets provide the ability to program and recall system

settings ranging from an individual signal processing parameter

to a complete system setup; while Group controls provide master

volume control of multiple gains, or control of multiple instances of

the same signal processing function type. Both Parameter set and

Group programming functions are easily mapped to the physical

controls of a Bose control center, or may be invoked remotely

using a standard serial protocol or general purpose inputs.

Smart Simulation programming enables designers to test and

modify system control programming while off-line, eliminating

the need to connect to the actual system to configure and test

system control programming. Virtual control centers are included

to test system operation, and all parameter set, group and

general purpose input and outputs may be tested using the Smart

Simulation.

Minimum System Requirements

The following are the minimum system requirements for

ControlSpace® Designer™ 4.0

Operating System:

Microsoft Windows 7 (Home, Professional* or Ultimate*)

Microsoft Windows XP Professional, Service Pack 2 (or later)

Processor:

850 MHz Pentium

III (1.50 GHz Pentium M or Pentium 4

recommended)

RAM:

512MB of RAM available (1GB recommended)

Disc Space:

512MB of disk space available (1GB recommended)

USB & Interfaces:

A scroll-wheel mouse (highly recommended)

Additional System Requirements:

ControlSpace Designer v4.0 requires the installation of

Microsoft .NET version 3.5.

Important note: ControlSpace Designer software is not fully tested

for operation running on a virtual Windows machine using Apple®

Macintosh® computers. For critical set up and control operations

a standard Windows PC is recommended for use.

Expansion Cards

ControlSpace® ESP-00/1240/4120 Dante™ network card

Provides Dante™ network connectivity for up to 32 channels of

digital audio. Dual ports can be configured for switched (default)

or redundant networking.

Product Code: 359842-0020

ControlSpace® ESP-00 CobraNet® I/O expansion card

Provides up to 32 channels of CobraNet digital audio.

Product Code: 311506

ControlSpace® ESP-00 ESPLink 8-channel output card

Provides eight channels of digital audio over a single optical

cable for sending audio to one or more ESPLink-equipped

PowerMatch® amplifiers.

Product Code: 350513-0010

ControlSpace®ESP-00 4x4 mic/line input/output card series II

Occupies two audio slots. Provides four microphone or line-level

inputs (software-selectable), and four line-level outputs. Expands

the number of available analog I/O channels. ESP-00 II can

support a total of four 4x4 cards for a total of 16 mic/line inputs

and 16 line outputs.

Product Code: 041915

ControlSpace® ESP-00 SDR 4-Ch mic/line input card

Provides four microphone or line-level inputs (software-

selectable).

Product Code: 041917

ControlSpace® ESP-00 SDR 4-Ch line output card

Provides four line-level outputs.

Product Code: 041916

ControlSpace® ESP-00 EDR line-level input card

Provides four extended dynamic range line level inputs.

Product Code: 041764

ControlSpace® ESP-00 EDR line-level output card

Provides four extended dynamic range line level outputs.

Product Code: 041763

ControlSpace® ESP-00 AES3 eight-channel line input card

Provides eight channels of AES3 digital audio input.

Product Code: 041765

ControlSpace® ESP-00 AES3 eight-channel line output card

Provides eight channels of AES3 digital audio output.

Product Code: 041766

ControlSpace® ESP-00 surround sound decoder input card

Provides surround sound decoding for Dolby 5.1, DTS 5.1, and

DTS 6.1 over coaxial and S/PDIF, eliminating the need for an

external decoder and integrating all audio processing within the

ESP-00 II.

Product Code: 302210

ControlSpace® ESP-00 GPIO card

Installs in the available GPIO2 slot. Augments the standard GPIO

card by adding eight additional control inputs and eight additional

control outputs on a second card.

Product Code: 041768

Architects’ and Engineers’

Specifications

The engineered sound processor shall be an open-architecture

card-frame based audio signal processor with eight open card

1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários

Bose ESP-00 Series II Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Processadores Bose ESP-00 Series II