English
Bluetooth
Settings
Devices
Bluetooth
ON
Connected
Bose SLIII
A
B
C
D
Refer to the Important Safety Instructions enclosed in the carton. Please read and keep this Quick Start
Guide, Important Safety
Instructions and, Warranty.
For additional information about your Bose
®
SoundLink
®
Bluetooth
®
speaker III, refer to the Owner’s Guide:
http://global.Bose.com U.S. only: http://owners.Bose.com
AC power supply
Slide the AC power adapter for your region onto the AC power supply.
Connecting to AC power
Plug the power cord on the AC power supply into the DC connector on the speaker. Plug the AC power supply
into a live AC (mains) outlet. The speaker emits a tone to conrm
connection to AC power and the battery
begins to charge.
Note: The rst time using your SoundLink
®
Bluetooth
®
speaker III, connect it to AC (mains) power and charge the
battery for three hours. You can use the speaker while charging the battery.
Pairing and connecting Bluetooth
®
devices
To pair and connect a Bluetooth device to the speaker:
A. Press Power
to turn the speaker on.
Note: If you are using the speaker for the rst time, the speaker automatically becomes discoverable (Bluetooth
status indicator blinks blue). After a device pairs and connects to the speaker, the speaker remains con-
nected (Bluetooth status indicator solid white).
B.
Press Bluetooth
to make the speaker discoverable.
C.
Turn on Bluetooth on your device, locate the Bluetooth device list, and select the device named, “Bose SLIII.”
If
your device prompts you for a passcode, enter “0000” (four zeroes).
D.
When pairing is complete and your device is connected to the speaker
, the Bluetooth status indicator on the
speaker changes from blinking blue to solid white and the speaker emits a tone.
Notes:
• Press Bluetooth on the speaker to switch between connecting/connected and discoverable.
•
If the speaker turns off after ve minutes, it has not paired or connected with your device. Try pairing your device
again or see “Troubleshooting” below.
Speaker memory
The speaker can remember up to six paired devices. If you pair the speaker with an additional device, the device
least recently connected is no longer paired with the speaker.
To clear the speaker memory of all devices, press and hold Bluetooth
on the speaker (about 10 seconds)
until
you hear a tone. All devices are cleared and the speaker becomes discoverable.
Reconnecting a device
When powered on, the speaker reconnects with a device in memory, starting with the last connected device. If the
last connected device is not available, the speaker connects to the next to last
connected device, and so forth.
The speaker searches for a paired device for approximately 30 seconds.
Control buttons and status indicators
Control buttons are located on the top of the speaker.
• Press to turn the speaker on or off. If the speaker is not used within 30 minutes, the speaker
automatically turns off to preserve battery power.
• Press and hold to observe the battery status indicator.
Press to select the Bluetooth source.
•
The speaker attempts to connect to the last paired device. If there are no paired devices,
the
speaker becomes discoverable.
•
Once Bluetooth is connected, press again to set the speaker to discoverable and allow pairing with
another Bluetooth device.
• Each time you press Bluetooth, the speaker switches between connecting/connected and
discoverable.
Press to select the AUX source.
Press to mute/unmute sound from the speaker.
•
Press
−
to incrementally decrease speaker volume. Press and hold to continously decrease
speaker volume.
• Press
+
to increase speaker volume. Press and hold to continously increase speaker volume.
Status indicators illuminate when an audio source or speaker state is activated.
Indicates the Bluetooth speaker state when the Bluetooth source is selected:
•
Blinking blue – Discoverable and ready to pair with a Bluetooth device.
•
Blinking white – Attempting to connect to a paired device.
•Solid white – Connected to paired device.
• Blinks as the volume of the speaker increases or decreases, when Bluetooth is the source.
When the
indicator blinks twice, the maximum or minimum volume has been reached.
•
AUX is the selected source.
•
Blinks as the volume of the speaker increases or decreases when AUX is the source. When the
indicator blinks twice, the maximum or minimum volume has been reached.
Indicates the battery power level:
Green - full charge Yellow - medium charge Blinking red - charge is needed
Blinks to indicate the sound is muted.
Note:
The SERVICE connector on the back of the speaker is only for software updates. It cannot be used to
connect an audio device.
Battery
Charging
Recommended charging time is three hours to fully charge the battery. You can use the speaker while charging
the battery.
Blinking yellow Battery is charging
Solid green Battery is fully charged
Note: Battery performance varies with the content played and loudness at which it is played. In typical usage,
the speaker battery lasts up to 14 hours.
Protection mode
When the speaker is unplugged and unused for more than 24 days, it enters battery protection mode to preserve
battery power. To reactivate the speaker connect it to AC power.
Replacing
Only Bose can replace the battery in your speaker. For battery replacement, please contact Bose Customer Service.
Tips on placing the speaker
When using your Bose
®
speaker indoors or outdoors, the tonal quality can vary depending on where you place the speaker.
When using your speaker outdoors, you should expect the tonal quality to change as you move farther away from
the speaker.
Keep the following guidelines in mind when placing your speaker:
• For optimal sound, the front of the speaker (with the Bose logo) should face the user.
•
For best bass response, the back of the speaker should be a few inches from a vertical surface.
•
Do not place the speaker in a small area that is enclosed on all sides except the front, as this will adversely
affect sound quality.
• Do not place the speaker on wet or dirty surfaces.
Troubleshooting
For additional troubleshooting information for your Bose
®
SoundLink
®
Bluetooth
®
speaker III,
refer to the
Owner’s Guide at http://global.Bose.com
Speaker will not turn on
•
If operating on AC power, ensure your speaker is connected to a working AC (mains) by the Bose AC power
supply included with your speaker.
•
If operating on battery power, the battery may be in protection mode or discharged. Connect to a working AC
outlet to restore the
battery to operational mode.
Cannot pair and connect the speaker with my Bluetooth device
• Ensure your speaker is discoverable (Bluetooth status indicator blinks blue).
•
Ensure Bluetooth is activated on your device, you have selected “Bose SLIII” in the Bluetooth device list, and the
connection has been conrmed by your device.
• Your Bluetooth device may be out of range. Try moving it closer to the speaker.
•
If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth functionality.
•
Refer to the owner’s guide, help system, or technical support for your Bluetooth device to learn how it pairs with
other Bluetooth devices.
• Turn the speaker off and back on, and pair your device and speaker.
•
Check for updated software for your Bluetooth device, or go to owners.Bose.com for updates to the SoundLink
®
Bluetooth
®
speaker III.
Paired Bluetooth device will not connect to the speaker
• Ensure the speaker is in connecting mode (Bluetooth status indicator blinks white).
•
Ensure Bluetooth is enabled on your device.
•
Your device may be out of range. Try moving it closer to the speaker.
•
Turn the device off and back on, and connect it to the speaker.
•
If possible, turn off all other nearby Bluetooth devices or disable their Bluetooth functionality.
•
Clear the speaker memory. Pair and connect the device to the speaker again.
•
Reset the speaker. Press and hold Mute on the speaker for ten seconds until all status indicators briey
illuminate and the speaker turns off. Turn the speaker on again, and connect your device.
The speaker indicates a connection, but is not playing music
• Ensure the device you want to hear is connected to the speaker and playing audio.
•
Ensure the speaker is not muted and the speaker volume is turned up.
•
Turn up the volume on your device.
•
Your device may be out of range. Try moving it closer to the speaker.
•
Move your device away from any device that generates electromagnetic interference, such as another Bluetooth
device, cordless phone, microwave oven, or wireless router.
• Turn off or disable Bluetooth functionality on all other nearby paired devices (including Bose
®
preferred devices)
and reconnect the device you want to hear.
• Turn the speaker off and back on.
•
Reset the speaker. Press and hold Mute on the speaker for ten seconds until all status indicators briey illumi-
nate and the speaker turns off. Turn the speaker on again, and connect your device.
Cleaning
To clean the exterior surface of your product, wipe it using a soft, dry cloth.
•
Do not use solvents, chemicals, or sprays.
•
Do not allow liquids to spill or objects to drop into any openings.
Technical information
AC power supply rating
Input: 100 - 240V
, 50/60Hz,
600mA
Output: 17 VDC, 1A Max
Input power rating
Input: 17 - 20 VDC, 1A Max
Weight
3.03 lb. (1.37 kg)
Dimensions
5.1”H x 9.6”W x 1.9”D
(13.0 cm x 24.4 cm x 4.8 cm)
Temperature range for use
32° to 13°F (0° to + °C)
Please complete for your records
The serial number is located on the bottom of the speaker: _________________________________________________________
The model number is located on the bottom of the speaker: ________________________________________________________
We suggest you keep your receipt with this Quick Start Guide.
Register your speaker by going to http://global.Bose.com/register.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose
Corporation is under license.
Refer to the complete Owner’s Guide, available online, for more information about your Bose
®
SoundLink
®
Bluetooth
®
speaker III. To re-
quest a printed copy of the complete Owner’s Guide, please refer to the phone numbers provided for your region.
©2013 Bose Corporation. No part of this work may be reproduced, modied, distributed, or otherwise used without written permission.
한국어 简体中文
포장 상자에 포함된 중요 안전 지침을 참조하십시오. 본 빠른 시작 안내서, 중요 안전 지침 및
보증서를 읽고 보관해 두십시오.
Bose
®
SoundLink
®
Bluetooth
®
스피커 III에 대한 추가 정보는 사용자 안내서를 참조하십시오:
http://global.Bose.com 미국에 한함: http://owners.Bose.com
AC 전원 공급 장치
AC 전원 공급 장치에서 발을 꺼냅니다.
AC 전원 연결
AC 전원 공급 장치의 전원 코드를 스피커의 DC 커넥터에 꽂습니다. AC 전원 공급 장치를 전기가
들어오는 AC(주전원) 콘센트에 꽂습니다. 스피커에서 AC 전원 연결을 확인하는 작동음이 나고
배터리가 충전을 시작합니다.
�참고:
처음 SoundLink
®
Bluetooth
®
스피커 III를 사용할 때는 AC(주전원) 전원에 연결하고 배터리를 3시간
동안 충전하십시오. 배터리 충전 중에도 스피커를 사용할 수 있습니다.
Bluetooth
®
장치 쌍 결합 및 연결
Bluetooth
장치를 쌍 결합으로 스피커에 연결하려면:
A. 전원
을 눌러 스피커를 켭니다.
�참고:
스피커를 처음 사용할 경우 스피커가 자동으로 발견 가능이 됩니다(
Bluetooth
상태 표시등이
깜박 이 는 파란 색 임). 장치가 쌍 결합으로 스피커 에 연 결되면 스피커가 연결된 상태 를
유지합니다(
Bluetooth
상태 표시등이 켜진 흰색임).
B.
Bluetooth
를 눌러 스피커를 발견 가능으로 만듭니다.
C. 장치의
Bluetooth
를 켜고
Bluetooth
장치 목록을 찾아 “Bose SLIII”라는 이름을 선택합니다. 장치에서
패스코드를 요청하면 “0000”(영 4개)을 입력합니다.
D. 쌍 결합이 완료되면 장치가 스피커에 연결되고
, 스피커의 Bluetooth
상태 표시등 이 깜박이는
파란색에서 켜진 흰색으로 변하고 작동음이 한 번 울립니다.
참고:
• 스피커의
Bluetooth
를 눌러 연결 중/연결됨과 발견 가능을 전환합니다.
• 스피커가 5분 후 꺼질 경우 장치와 쌍 결합되지 않거나 연결되지 못한 것입니다. 다시 쌍 결합을
시도하거나 아래에서 “문제 해결”을 참조하십시오.
스피커 메모리
스피커는 쌍 결합된 장치를 최대 6대까지 기억할 수 있습니다. 스피커를 추가 장치와 쌍 결합할 경우
시간상 가장 과거에 연결되었던 장치가 쌍 결합이 해제됩니다.
스피커 메모리에서 모든 장치를 지우려면 작동음이 한 번 들릴 때까지 스피커의
Bluetooth
를 (약
10초) 동안 길게 누릅니다. 모든 장치가 지워지고 스피커는 발견 가능이 됩니다.
장치 재연결
전원을 켜면 스피커는 최종 연결되었던 장치로부터 시작하여 메모리에 있는 장치를 재연결합니다.
최종 연결되었던 장치가 가용하지 않을 경우 스피커는 최종 바로 전의 장치와 연결되며, 나머지
장치에 대해서도 이러한 연결 방식을 취합니다. 스피커는 쌍 결합된 장치를 약 30초 동안 찾습니다.
콘트롤 버튼 및 상태 표시등
콘트롤 버튼은 스피커 상단에 위치해 있습니다.
• 눌러서 스피커 전원을 켜고 끕니다. 스피커를 30분 내에 사용하지 않을 경우 배터리
전력을 보존하기 위해 스피커가 자동으로 꺼집니다.
• 배터리 충전 상태를 점검하려면 길게 누릅니다.
눌러서
Bluetooth
소스를 선택합니다.
• 스피커가 마지막으로 쌍 결합된 장치 연결을 시도합니다. 쌍 결합된 장치가 없을 경우
스피커는 발견 가능이 됩니다.
•
Bluetooth
가 연결되면 다시 눌러 스피커를 검색 가능으로 설정하고 다른
Bluetooth
장치와
쌍 결합을 허용합니다.
•
Bluetooth
를 누를 때마다 스피커는 연결 중/연결됨과 발견 가능을 전환합니다.
눌러서 AUX 장치를 선택합니다.
누르면 스피커 사운드가 음소거/음소거 해제됩니다.
•
−
를 눌러 스피커 볼륨을 내립니다. 계속 누르면 스피커 볼륨이 계속 내려갑니다.
•
+
를 눌러 스피커 볼륨을 올립니다. 계속 누르면 스피커 볼륨이 계속 올라갑니다.
상태 표시등은 오디오 소스 또는 스피커 상태가 활성화되면 불빛을 냅니다.
Bluetooth
소스가 선택되었을 때
Bluetooth
스피커 상태를 나타냅니다.
• 파란색이 깜박이는 경우 – 발견 가능 상태이며
Bluetooth
장치와 쌍 결합할 준비가
되었습니다.
• 흰색이 깜박이는 경우 – 쌍 결합된 장치에 연결을 시도하는 중입니다.
• 흰색이 켜진 경우 – 쌍 결합된 장치에 연결되었습니다.
• Bluetooth
가 소스일 경우 스피커 볼륨을 높이거나 줄일 때 깜박입니다. 표시등이 두 번
깜박이는 것은 최대 또는 최소 볼륨에 도달한 것입니다.
• AUX가 선택한 소스입니다.
• AU X가 소 스일 경 우 스 피커 볼 륨을 높이거나 줄일 때 깜 박입니다. 표시등이 두 번
깜박이는 것은 최대 또는 최소 볼륨에 도달한 것입니다.
배터리 전원 수준을 나타냅니다:
녹색 - 완전 충전 노란색 - 중간 충전
깜박이는 빨간색 - 충전 필요
깜박이는 것은 음소거되었음을 나타냅니다.
참고:
시스템 뒷면의 SERVICE 커넥터는 소프트웨어 업데이트 전용입니다. 오디오 장치를 연결하는
데 사용할 수 없습니다.
배터리
충전
배터리를 완전히 충전하기 위한 권장 충전 시간은 3시간입니다. 배터리 충전 중에도 스피커를 사용할
수 있습니다.
노란색이 깜박이는 경우 배터리 충전 중
녹색등이 켜져 있는 경우 배터리가 완전 충전됨
참고:
배터리 성능은 재생 중인 콘텐츠와 재생 볼륨에 따라 달라집니다. 일반적인 사용의 경우
스피커 배터리는 최대 14시간 지속됩니다.
보호 모드
스피커의 전원 코드를 빼고 24일 이상 사용하지 않을 경우 배터리 보호 모드로 들어가 배터리 전원을
보존합니다. 스피커를 재활성화하려면 AC 전원에 연결합니다.
교체
Bose만이 스피커의 배터리를 교체할 수 있습니다. 배터리 교체에 대해서는 Bose 고객 서비스 센터에
문의하십시오.
스피커 배치에 대한 유용한 팁
Bose
®
스피커를 실내 또는 실외에서 사용할 때 스피커를 배치한 곳에 따라 음색이 변할 수 있습니다.
스피커를 실외에서 사용할 때 사용자가 스피커에서 떨어질수록 음색이 변하는 것을 예상해야
합니다.
스피커를 배치할 때 다음 가이드라인을 유념하십시오.
• 최적의 사운드를 위해 스피커 전면(Bose 로고가 있음)이 사용자를 향해야 합니다.
• 최적의 저음 반응을 위해 스피커의 뒷면은 벽에서 5cm 이상 떨어져야 합니다.
• 스피커를 전면을 제외한 모든 면이 둘러싸인 작은 공간에 배치하면 안됩니다. 음질에 부정적인
영향을 줍니다.
• 스피커를 젖거나 먼지가 쌓인 바닥에 놓지 마십시오.
문제 해결
Bose
®
SoundLink
®
Bluetooth
®
스피커 III의 추가 문제 해결 정보는 http://global.Bose.com에서 사용자
안내서를 참조하십시오.
스피커가 켜지지 않을 경우
• AC 전원으로 작동할 경우 스피커가 스피커에 포함된 Bose AC 전원 공급 장치로 AC(주전원)에
연결되어야 합니다.
• 배터리 전원으로 작동할 경우 배터리가 보호 모드에 있거나 방전되었을 수 있습니다. 전기가
들어오는 AC 콘센트에 연결하여 배터리를 작동 모드로 복원하십시오.
스피커를
Bluetooth
장치와 쌍 결합하여 연결할 수 없을 경우
• 스피커가 발견 가능 상태인지 확인하십시오(
Bluetooth
상태 표시등이 깜박이는 파란색임).
• 장치에
Bluetooth
가 활성화되었고
Bluetooth
장치 목록에서 “Bose SLIII” 를 선택했고 장치로 연결을
확인했는지 확인하십시오.
• Bluetooth
장치가 유효 범위를 벗어났을 수 있습니다. 장치를 스피커 가까이로 옮겨 보십시오.
• 가능하면 근처의 다른 모든
Bluetooth
장치를 끄거나 그 장치의
Bluetooth
기능을 사용 해제하십시오.
• 다른
Bluetooth
장치와 쌍 결합하는 방법에 대해서는 사용하는
Bluetooth
장치의 사용자 안내서,
도움말 시스템 또는 기술 지원을 이용하십시오.
• 스피커 전원을 껐다가 다시 켠 후 장치를 스피커에 쌍 결합하십시오.
•
Bluetooth
장치에 업데이트된 소프트웨어가 있는지 확인하거나 owners.Bose.com에서 SoundLink
®
Bluetooth
®
스피커 III 업데이트가 있는지 확인하십시오.
쌍 결합된
Bluetooth
장치가 스피커에 연결되지 않을 경우
• 스피커가 연결 중 모드에 있는지 확인하십시오(
Bluetooth
상태 표시등이 깜박이는 흰색임).
• 장치에서
Bluetooth
가 사용 중인지 확인하십시오.
• 장치가 유효 범위를 벗어났을 수 있습니다. 장치를 스피커 가까이로 옮겨 보십시오.
• 장치 전원을 껐다가 다시 켠 후 스피커에 연결하십시오.
• 가능하면 근처의 다른 모든
Bluetooth
장치를 끄거나 그 장치의
Bluetooth
기능을 사용 해제하십시오.
• 스피커 메모리를 지우십시오. 장치를 스피커에 다시 쌍 결합하고 연결하십시오.
• 스피커를 재설정하십시오. 모든 상태 표시등이 잠깐 불을 밝히고 스피커가 꺼질 때까지 스피커의
음소거를 약 10초 동안 길게 누르십시오. 스피커를 다시 켜고 장치를 연결하십시오.
스피커가 연결을 나타내지만 음악을 재생하지 않는 경우
• 청취하려는 장치가 스피커에 연결되어 있고 오디오를 재생 중인지 확인하십시오.
• 스피커가 음소거되지 않았고 스피커 볼륨을 올렸는지 확인하십시오.
• 장치의 볼륨을 올리십시오.
• 장치가 유효 범위를 벗어났을 수 있습니다. 장치를 스피커 가까이로 옮겨 보십시오.
• 장치를 다른
Bluetooth
장치, 무선 전화기, 전자렌지 또는 무선 라우터 등 전자기 간섭을 일으키는
다른 장치에서 떨어뜨리십시오.
• 근처의 쌍 결합된 모든 다른 장치(Bose
®
기본 설정 장치 포함)에서
Bluetooth
기능을 끄거나 사용
해제하고 청취를 원하는 장치를 재연결하십시오.
• 스피커를 껐다가 다시 켜십시오.
• 스피커를 재설정하십시오. 모든 상태 표시등이 잠깐 불을 밝히고 스피커가 꺼질 때까지 스피커의
음소거를 약 10초 동안 길게 누르십시오. 스피커를 다시 켜고 장치를 연결하십시오.
청소
제품 외장을 청소하기 위해, 부드러운 마른 천을 사용하여 닦을 수 있습니다.
• 용제나 화학 약품 또는 스프레이를 사용하지 마십시오.
• 기기에 액체가 흘러 들어가거나 물체가 떨어져 들어가지 않도록 주의하십시오.
기술 정보
AC 전원 공급 장치 정격
입력: 100-240V
,
50/60Hz, 600mA
출력: 17VDC, 1A 최대
입력 전원 정격
입력: 17 - 20VDC, 1A 최대
중량
1.37kg
규격
13.0cm H x 24.4cm W x 4.8cm D
사용 온도 범위
0° ~ + °C
기록용으로 작성하십시오.
일련 번호는 스피커 하단에 위치해 있습니다. _________________________________________________________________
모델 번호는 스피커 하단에 위치해 있습니다. _________________________________________________________________
영수증을 빠른 시작 안내서와 함께 보관하십시오.
http://global.Bose.com/register에서 스피커를 쉽게 등록할 수 있습니다.
Bluetooth
®
단어 표시와 로고는 Bluetooth SIG, Inc.의 등록 상표이며 Bose Corporation은 사용권 계약 하에 해당 표시를
사용합니다.
Bose
®
Soun dLink
®
Bl uetooth
®
스피커 III에 대한 자세한 정보는 온라인으로 사용할 수 있는 사용자 안내서 전문을
참조하십시오. 사용자 안내서 전문의 인쇄본을 요청하려면 귀하의 지역용으로 제공된 전화 번호를 참조하십시오.
©2013 Bose Corporation. 서면 승인 없이 본 설명서의 특정 부분을 복제, 변경, 배포 또는 사용할 수 없습니다.
请参阅纸箱中随附的“重要安全性指示”。请阅读并保存好此快速启动指南、重要安全性指示和
保修说明。
关于 Bose
®
SoundLink
®
蓝牙
®
扬声器 III 的其他信息,请参阅用户指南:
http://global.Bose.com
仅限美国:http://Owners.Bose.com
交流电源
展开交流电源插脚。
接通交流电源
将交流电源上的电源线插入扬声器上的直流连接器中。将交流电源插入通电的交流电(电源)
插座中。扬声器发出特定的声音,确认交流电源已连接并开始为电池充电。
注意:
首次使用 SoundLink
®
蓝牙
®
扬声器 III 时,请将其连接至交流电(电源)并为电池充电 3 个
小时。电池充电时仍可使用扬声器。
与
蓝牙
®
设备配对并连接
将
蓝牙
设备配对并连接至扬声器:
A. 按下电源
打开扬声器。
注意:
如果您是首次使用该扬声器,则会自动显示该扬声器(
蓝牙
状态指示灯闪烁蓝色)。设备
与扬声器配对并连接成功后,扬声器保持连接状态(
蓝牙
状态指示灯为稳定的白色)。
B. 按下
蓝牙
以便可发现该扬声器。
C. 打开设备上的
蓝牙
,找到
蓝牙
设备列表,并选择名称为 “Bose SLIII.” 的设备。如果设备提示输
入通行码,请输入 “0000”(四个零)。
D. 完成配对并将设备连接至扬声器
后,
扬声器上的
蓝牙
状态指示灯 从闪烁蓝色变为稳定白色且
扬声器发出特定的声音。
注意:
• 按下扬声器上的
蓝牙
,可在“正在连接 / 已连接”和“可发现”之间切换。
• 如果 5 分钟后扬声器关闭,则表示其尚未与设备配对或连接。尝试再次配对设备或参见下文的
“故障诊断”。
扬声器内存
此扬声器可以储存多达 6 个配对设备。如果要将扬声器与其他设备配对,最近连接次数最少的设
备将不再与扬声器配对。
要清除扬声器中所有设备的内存,按住扬声器上的
蓝牙
大约 10 秒钟直至听到一个特定的声音。
此时所有设备均已清除且扬声器进入可发现模式。
重新连接设备
扬声器打开后将从内存中上次连接的设备开始进行设备连接。如果上次连接的设备不可用,扬声
器将与此设备之前的设备连接,并以此类推。扬声器搜索配对设备大约需要 30 秒钟。
控制按钮和状态指示灯
控制按钮位于扬声器顶部。
• 按下可打开或关闭扬声器。如果扬声器 30 分钟内未使用,则会自动关闭以保留电量。
• 按住可观察电池状态指示灯。
按下可选择
蓝牙
音源。
• 扬声器试图连接到上次配对的设备。如果没有配对设备,扬声器会进入可发现模式。
• 连接
蓝牙
后,再次按下可将扬声器设置为可发现模式并允许其与其他
蓝牙
设备配对。
• 每次按下
蓝牙
,扬声器会在“正在连接 / 已连接”和“可发现”之间切换。
按下可选择 AUX 音源。
按下可使扬声器静音 / 取消静音。
• 按下
−
可逐步降低扬声器音量。按住可连续降低扬声器音量。
• 按下
+
可提高扬声器音量。按住可连续提高扬声器音量。
当音频来源或扬声器处于活动状态时,状态指示灯亮起。
在选择
蓝牙
音源后指示
蓝牙
扬声器的状态:
• 闪烁蓝色 – 可发现并可与
蓝牙
设备配对。
• 闪烁的白色 - 尝试连接到已配对的设备。
• 稳定的白色 – 已连接至已配对的设备。
• 当将
蓝牙
作为音源时,随着扬声器音量的增减而闪烁。当指示灯闪烁两次时,即表
示已达到最高或最低音量。
• AUX 是选择的音源。
• 当将 AUX 作为音源时,随着扬声器音量的增减而闪烁。当指示灯闪烁两次时,即表
示已达到最高或最低音量。
指示电池电量:
绿色 - 完全充满 黄色 - 充满一半 闪烁红色 - 需要充电
闪烁表示声音静音。
注意:
扬声器后面的 SERVICE(服务)连接器仅用于软件更新。不可用于连接音频设备。
电池
充电
电池完全充电的建议充电时间为 3 个小时。电池充电时仍可使用扬声器。
闪烁的黄色 电池正在充电
稳定的绿色 电池已充满
注意:
电池性能随播放内容和音量而变化。正常使用时,扬声器电池电量最长可持续 14 小时。
保护模式
如果扬声器未通电且未使用时间超过 24 天,该系统会进入电池保护模式以保护电池电源。要重
新激活扬声器,请将它连接到交流电源。
更换
只有 Bose 才可以更换扬声器电池。要更换电池,请联系 Bose 客户服务。
关于放置扬声器的提示
在室内或室外使用 Bose
®
扬声器时,音质会根据扬声器的放置位置而存在差异。
在室外使用扬声器时,随着您和扬声器之间距离的增加音质出现变化是正常现象。
放置扬声器时,请记住下面的原则:
• 要获得最佳音质,扬声器的正面(带有 Bose 徽标)应面向用户。
• 要获得最佳低音响应,扬声器的背面应离开垂直表面几英寸。
• 不要将扬声器放在只有前面开敞而其余各面封闭的狭小区域内,这会对音质造成不利影响。
• 不要将扬声器放在潮湿或脏的表面上。
故障诊断
关于 Bose
®
SoundLink
®
蓝牙
®
扬声器 III 的其他信息,请参阅用户指南 http://global.Bose.com
不能开启扬声器
• 如果使用交流电源供电,请确保扬声器已通过随附的 Bose 交流电源连接至交流电(电源)。
• 如果使用电池供电,电池可能处于保护模式或已放电。请连接到有电的交流插座恢复电池的操
作模式。
无法将扬声器和我的
蓝牙
设备进行配对并连接
• 确保扬声器处于可发现模式(
蓝牙
状态指示灯闪烁蓝色)。
• 确保设备的
蓝牙
处于活动状态,您已选择
蓝牙
设备列表中的 “Bose SLIII”,并且设备已确认连接。
• 您的
蓝牙
设备不在范围之内。尝试让其靠近扬声器。
• 如有可能,请关闭附近所有其他的
蓝牙
设备或禁用它们的
蓝牙
功能。
• 请参阅
蓝牙
设备的用户指南、帮助系统或技术支持,了解该设备如何与其他
蓝牙
设备配对。
• 关闭然后再打开扬声器,并将设备与扬声器配对。
• 检查
您的
蓝牙
设备的更新软件,或转到 owners.Bose.com 获取有关 SoundLink
®
蓝牙
®
扬声器 III 的更新。
配对的
蓝牙
设备没有连接到扬声器
• 确保扬声器处于连接模式(
蓝牙
状态指示灯闪烁白色)。
• 确保设备的
蓝牙
已启用。
• 您的设备可能不在范围之内。尝试让其靠近扬声器。
• 关闭然后再打开设备,并将其连接至扬声器。
• 如有可能,请关闭附近所有其他的
蓝牙
设备或禁用它们的
蓝牙
功能。
• 清空扬声器内存。再次将设备与扬声器配对并连接。
• 重置扬声器。按住扬声器上的“静音”10 秒钟直至所有的状态指示灯短暂亮起,同时扬声器关闭。
重新打开扬声器,并与设备连接。
扬声器指示有一个连接,但不播放音乐
• 确保要收听的设备已连接至扬声器并播放音频。
• 确保扬声器没有设置为静音,并提高了扬声器的音量。
• 调高设备的音量。
• 您的设备可能不在范围之内。尝试让其靠近扬声器。
• 移动您的设备以远离产生电
磁干扰的任何设备,例如另一台
蓝牙
设备、无绳电话、微波炉或无
线路由器。
• 关闭或禁用附近所有其他配对设备上的
蓝牙
功能(包括 Bose
®
首选设备),然后重新连接希望配
对的设备。
• 关闭然后再打开扬声器。
• 重置扬声器。按住扬声器上的“静音”10 秒钟直至所有的状态指示灯短暂亮起,同时扬声器关闭。
重新打开扬声器,并与设备连接。
清洁
要清洁产品的外表面,可以使用柔软的干布擦拭。
• 请勿使用溶剂、化学品或喷雾剂。
• 请勿使液体溅入或者物品落入任何开口中。
技术信息
交流电源额定值
输入:100 - 240V
,
50/60Hz, 600mA
输出:17VDC,最大 1A
额定输入功率
输入:17 - 20 VDC,最大 1A
重量
3.03 磅 (1.37 kg)
尺寸
5.1"H x 9.6"W x 1.9"D
(13.0 cm x 24.4 cm x 4.8 cm)
使用时的温度范围
32° 至 °F (0° 至 + °C)
请填写以下内容,留作记录
序列号位于扬声器底部: ________________________________________________________________________________
型号位于扬声器底部: __________________________________________________________________________________
建议您将发票和本快速启动指南保存在一起。
请转到 http://global.Bose.com/registe 注册您的扬声器。
蓝牙
®
文字标记和徽标是由 Bluetooth SIG, Inc. 所拥有的注册商标,Bose Corporation 对上述标记的任何使用都遵守许可规定。
有关 Bose
®
SoundLink
®
蓝牙
®
扬声器 III 的更多信息,请参考完整的在线用户指南。要申请获得完整用户指南的印刷本,
请查阅为您所在地区提供的电话号码。
版权所有 ©2013 Bose Corporation。未经书面许可,不得复制、修改、发行或以其它方式使用本资料的任何部分。
Bose
®
SoundLink
®
Bluetooth
®
speaker III
:
http://global.Bose.com
: http://owners.Bose.com
AC
AC
AC
AC
DC
AC
AC (
)
AC
SoundLink
®
Bluetooth
®
speaker III
AC (
)
Bluetooth
®
Bluetooth
:
A.
(
Bluetooth
)
Bluetooth
B.
Bluetooth
C.
Bluetooth
Bluetooth
“Bose SLIII”
“0000” (
)
D.
Bluetooth
•
Bluetooth
/
•
“
”
6
Bluetooth
(
10
)
30
•
30
•
Bluetooth
•
•
Bluetooth
Bluetooth
•
Bluetooth
/
AUX
/
•
−
•
+
BluetoothBluetooth
:
•
–
Bluetooth
•
–
•
–
•
Bluetooth
• AUX
•
AUX
-
-
-
:
SERVICE
3
:
14
24
AC
Bose
Bose
Bose
®
:
•
(
Bose)
•
•
•
Bose
®
SoundLink
®
Bluetooth
®
speaker III
http://global.Bose.com
•
AC
AC (
)
AC
Bose
•
AC
Bluetooth
•
(
Bluetooth
)
•
Bluetooth
“Bose SLIII”
Bluetooth
•
Bluetooth
•
Bluetooth
Bluetooth
•
Bluetooth
Bluetooth
•
•
Bluetooth
owners.Bose.com
SoundLink
®
Bluetooth
®
speaker III
Bluetooth
•
(
Bluetooth
)
•
Bluetooth
•
•
•
Bluetooth
Bluetooth
•
•
•
•
•
•
•
Bluetooth
•
Bluetooth
(
Bose
®
)
•
•
•
•
AC
: 100 - 240V ,
50/60Hz, 600mA
:
17VDC, 1A
:
17 - 20 VDC, 1A
1.37
.
130
. x
24.4
. x
4.8
.
0°
+ °C (32°
°F)
: ____________________________________________________
: ________________________________________________________________
http://global.Bose.com/register
Bluetooth
®
Bluetooth SIG, Inc.
Bose
Corporation
Bose
®
SoundLink
®
Bluetooth
®
speaker III
©2013 Bose Corporation
5
5
5
13
13
5
Comentários a estes Manuais